TAD Model-1 Specifications

TECHNICAL FEATURES:

CST Coincident Source Technology MF / HF driver: • 165mm Beryllium cone midrange driver • 30mm Beryllium dome/cone high-frequency driver • HF / MF matching horn • Neodymium magnet • Low profile surround • Copper shorting ring • Point source radiator • ISO-Drive driver isolation Tri-laminate Mid-Bass drivers: • 200mm Woven aramid fiber / foamed acrylic /woven     aramid fiber composite cone • Optimized field-geometry magnet structure • Neodymium magnet • High-excursion multi roll surround • Ultra-linear suspension • Copper shorting ring Tri-laminate Bass drivers: • Two 250mm Woven aramid fiber / foamed acrylic /woven aramid fiber composite cone • Optimized field-geometry magnet structure • Neodymium magnet • High-excursion multi roll surround • Ultra-linear suspension • Copper shorting ring Structurally Inert Laminated Enclosure: • 52 laminated sections of high-grade birch ply • Woofer drivers rigidly mounted via internal clamp rings • Integral port and cross bracing • Translucent high gloss piano finish CST Composite Enclosure (Head) • ISO-Drive: Isolates the CST driver from the enclosure • 15mm Thick Aluminum / Epoxy Composite

PERFORMANCE DATA:

Frequency Range:                              25 Hz ~ 100 kHz Crossover Frequency:                        100 Hz, 350 Hz and 2.2 kHz Amplifier Requirements:                      50 ~ 300 W Sensitivity:                                           90 dB spl@ 2.83V 1m Maximum Output:                                115 dB spl Nominal Impedance:                            8 ohms (minimum 3.4 ohms) Dimensions:                                        54.4”H x 22.8”W x 22.4”D Weight:                                                285 lbs